A packaging file can look finished on screen and still be unusable at the printer. The usual reasons are small: no bleed, a logo sitting on a fold, a barcode shrunk to fit a corner.
Each of those is cheap to fix in the file and expensive to fix after the run. One printer’s proofing guide puts the rule plainly: if a mistake is in the proof you approved, “the run prints as approved and the reprint is billed.” 4over4 proof guide
This guide is for a founder or designer sending a box, pouch, or label to a supplier for the first time. It covers the file, the barcode, and the proof. The figures below are common starting points with a source for each. Your supplier’s own specification always wins.
Six words you will hear
| Term | Plain meaning |
|---|---|
| Dieline | The flat outline of the pack, showing where it will be cut and folded. Your artwork is placed on top of it. |
| Bleed | Artwork that continues past the cut line, so a slightly off cut does not leave a white edge. |
| Safe area | The zone inside each panel where text and logos are far enough from cuts and folds to survive. |
| CMYK and spot color | CMYK builds colors from four inks. A spot color is one pre-mixed ink, often chosen from the Pantone system, used when a brand color must match exactly. |
| Quiet zone | The empty space to the left and right of a barcode that tells the scanner where the code starts and ends. |
| Proof | The version the printer sends you to approve before printing. Once approved, it is the reference for the run. |
Ask for the supplier’s dieline before you design
The dieline defines the physical structure of the pack, and the artwork must line up with it. Esko prepress guide The outline depends on the material and on how the supplier cuts, folds, and glues the pack, so a template from somewhere else is a guess.
Ask the supplier for:
- the dieline as a vector file (PDF or AI), at full size;
- a key that says which line style means cut, crease, and perforation;
- their bleed and safe-area distances;
- the areas that must stay free of ink or varnish, such as glue flaps.
A common convention is that solid lines are cuts and dashed lines are creases, with the dieline kept on its own layer so it does not print. 4over4 proof guide Confirm it against the key. Then leave the dieline alone: do not scale it, redraw it, or merge it into the artwork.
Bleed, cut line, and safe area
Cutting is a mechanical step, and it is never perfectly on the line. Two margins absorb that movement.
Bleed goes outward. Esko describes it as “typically 3mm, but this varies by job and substrate.” A US printer gives an eighth of an inch (about 3.2 mm) past every cut edge, glue flap included. 4over4 proof guide Backgrounds, photos, and patterns must fill that band.
Safe area goes inward. The same printer keeps type, logos, and rules an eighth of an inch inside the cut, and notes that creases need more room than that. Anything a customer must be able to read stays inside it.
Two details catch first-time files. Bleed is needed on every cut edge, including flaps the customer never sees. And a design that wraps around a corner crosses a crease, so check where the fold lands on a face, a word, or a pattern.
Color, ink, and folds
A screen mixes light; a press lays down ink. Esko’s prepress guide lists the checks a printer runs on color: every color in the file is identified as a spot color or a CMYK build, spot colors are compared with brand standards, and “RGB images must be converted to CMYK or appropriate color space.”
For a founder, that turns into three decisions to make with the supplier:
- Which colors are spot inks. A brand color that must match across reorders is usually specified as a spot color. Agree the number of spot inks with the supplier before the quote.
- How much ink the material can take. One printer’s guide says coated stock generally tolerates around 300 percent total coverage, and board and uncoated stock need less. 4over4 proof guide Ask for your material’s limit.
- What crosses a fold. The same guide warns that “a heavy solid that crosses a crease will crack,” leaving a white hairline, and that dark solids on uncoated or recycled board are the worst case.
Finishes change color too. That guide notes a matte laminate flattens and slightly darkens a design, and a soft-touch coating mutes it noticeably. If the brand color matters, judge it on a proof that includes the finish.
For photos, a general production checklist gives “typically 300 dpi at final print size” and names PDF/X-1a or PDF/X-4 as export standards. Racklify checklist Treat both as questions for your supplier, because print methods differ. Esko notes, for example, that very small dots may not hold on a flexo plate, while offset reproduces finer detail.
If your brand colors already live in a token system for the website, the print values belong beside them. See Semantic Design Tokens: From Brand Colors to a Working UI.
A barcode that scans
The barcode is the one element on the pack that a machine has to read, and it fails for three predictable reasons: size, color, and crowding.
Size
GS1, the organization that issues retail barcode numbers, publishes the sizes for EAN-13, the 13-digit retail barcode. At 100% the narrowest bar is 0.33 mm, and the symbol is 37.29 mm wide including its quiet zones. GS1 UK: barcode size
| Size | Narrowest bar | Width | Bar height |
|---|---|---|---|
| 80% | 0.264 mm | 29.83 mm | 18.28 mm |
| 90% | 0.297 mm | 33.56 mm | 20.57 mm |
| 100% | 0.330 mm | 37.29 mm | 22.85 mm |
| 150% | 0.495 mm | 55.94 mm | 34.28 mm |
GS1 UK adds three rules: keep a resized barcode in proportion, do not shorten its height unless there is no alternative, and prefer larger over smaller, because “the smaller you make the barcode, the less margin for error you have in the printing process.” GS1 UK’s EAN-13 table runs from 80% to 150%. For the retail UPC symbol, a US printer’s proofing guide gives a range of 80 to 200 percent of nominal size. 4over4 proof guide Ask your supplier before going above 150% with an EAN-13.
Will an EAN-13 fit?
The calculator scales GS1 UK’s 100% figures, stays within the 80% to 150% sizes in its table, and leaves 2 mm spare on each side. It covers EAN-13 only. Confirm the final size with your supplier and with GS1’s current General Specifications.
If your retailer asks for UPC-A, the 12-digit symbol, its dimensions are not in the table above. Take them from GS1 US or your supplier.
Color
Scanners typically read with red light. GS1 UK’s guidance is that the best combination is black bars on a white background; dark green and dark blue bars can work; red and reddish colors, including brown, should not be used for bars because the scanner cannot see them. A reversed barcode, with light bars on a dark background, cannot be read. GS1 UK: barcode color
On clear or semi-transparent film, GS1 UK says not to rely on the product showing through as the background. Print a solid light panel behind the code.
Space and position
Nothing may be printed in the quiet zones, and they must be the same color as the spaces between the bars. GS1 UK recommends adding “a couple of millimetres extra on each side” to allow for print variation. GS1 UK: quiet zones Keep the code on a flat panel, clear of folds, seams, and edges.
A phone app or a checkout beep is not proof of quality. GS1 UK separates a scanner, which only beeps or does not, from a verifier, which grades the print. It also says verification can only really be done on the real product, because material, contents, and print process all affect the result. GS1 UK: barcode quality
Make a paper mock-up
A flat PDF hides the errors that only appear in three dimensions: an upside-down back panel, a flap that covers the ingredients, a pattern that does not meet at the corner.
Print the file at 100 percent, cut along the cut lines, fold along the creases, and tape it together. 4over4’s guide treats this as a proof you make yourself, and uses it to check panel orientation and what the flaps hide. Put the real product inside if you can.
Then read every word on the assembled pack. Ask someone who has not seen the design to read it as well, and check weights, quantities, addresses, and codes against their original source.
Approve the proof in writing
Printers offer different kinds of proof, and each answers a different question.
| Proof | What it is for |
|---|---|
| PDF proof | Layout, text, dieline position, and barcode geometry. It does not show color or finish. |
| Folded paper mock-up | Panel orientation, what the flaps cover, and fit. You make it yourself. |
| Hard-copy color proof | Brand colors that must match across pieces or reorders. |
| Press check | Large runs where a reprint would cost far more than the check. It costs press time and delays the run. |
The table summarizes 4over4’s guide. Esko likewise notes that hard-copy proofing “remains important for color-critical jobs and new packaging structures.” Which proofs are available, and what each costs, depends on the supplier.
Approve once, in one written message that names the exact file version, and ask for a fresh proof after any change. The approved proof is what the printer prints from.
Hand-off checklist
- The dieline came from the supplier who will make the pack, for this material and size.
- The dieline is on its own layer, unscaled, and matches the supplier’s line key.
- Background artwork fills the bleed on every cut edge, including hidden flaps.
- Text, logos, and the barcode sit inside the safe area and clear of creases.
- Glue flaps and other no-print areas are empty.
- Spot colors are named and counted; everything else is CMYK, with no RGB images left.
- Heavy dark solids do not cross a crease, or the supplier has confirmed the material can take it.
- Images meet the supplier’s resolution at final size, and fonts are embedded or outlined.
- The barcode is at an agreed size, at least 80%, with full height and dark bars on a light background.
- The quiet zones are empty, with a little spare on each side.
- A printed, folded mock-up has been checked and read by a second person.
- The barcode number matches the product record, and a verification step on a real sample is planned.
- Approval is one written message naming the file version.
This checklist does not cover legal labeling. Ingredient lists, warnings, recycling marks, and minimum text sizes depend on the product and the country of sale, and need their own review.
Related reading
Packaging is where a brand system meets physical limits. For the screen side of the same system, see Semantic Design Tokens: From Brand Colors to a Working UI. Artech I/O’s brand-to-storefront work, which includes packaging and production, is described on the work page.
Sources
- GS1 UK: How big should a point-of-sale barcode be?
- GS1 UK: What colour should a barcode be?
- GS1 UK: What is a Quiet Zone?
- GS1 UK: How do I check barcode quality?
- Esko: A guide to the full packaging prepress process
- 4over4: How to check a packaging print proof before approval
- Racklify: Preparing packaging artwork for print
Sources checked November 15, 2026. In GS1 UK’s size table the 80% row prints the narrowest bar as 0.33 mm; this article uses 0.264 mm, which is 80% of 0.33 mm and matches the 80% value in the EAN-8 table on the same page. The carton diagram and checklist are illustrative recommendations, not reported client results.
Conversation
Discussion
Loading comments…